Filter
Top Products
To remove the Shared PERC 8 card:
1. Push down the two release levers at the edge of the Shared PERC 8 card to disengage the card from
the storage-controller card holder.
2. Orient the card so that the other end of the card disengages from the storage-controller card holder
on the system board.
CAUTION: When removing or replacing the Shared PERC 8 card, hold the card by its edges.
Do not handle the card while holding the battery or the heatsink.
Figure 1. Removing and Installing the Shared PERC 8 Card
1. release lever (2) 2. storage-controller card holder
3. storage controller card 4. battery
5. heatsink 6. touch points (2)
7. storage-controller card connector on the
system board
8. guide pins (2)
24