Filter
Top Products
10
ENGLISH
VIDEO IN
S-VIDEO IN
AUDIO IN
L
R
4
CONNECTIONS
• Read the manuals of all the components when making
connections.
• Keep the power supply cord unplugged until all connections
have been completed.
• If the power is on when connections are made, noise may
be generated and damage the speakers.
• Be sure to connect the left and right channels properly, L
(left) to L, R (right) to R.
• Plug the power supply cord securely into the power outlet.
Incomplete connection may result in noise.
• Binding the power supply cord together with connection
cords may result in humming or noise.
NOTES:
(1) Connecting to a TV
• Use the included audio video cord to connect the TV’s video input connector and audio input connectors to the DVD-3910’s VIDEO OUT
or S-VIDEO OUT and AUDIO OUT.
DVD-3910
TV
S-Video output connector
The video signals are divided into color (C) and brightness (Y) signals, achieving a clearer
picture.
If the TV is equipped with an S-Video input connector, we recommend connecting it to
the DVD-3910’s S-Video output connector using a commercially available S-Video
connection cord.
To power outlet
• Connect the DVD-3910’s video outputs to the TV either
directly or through an AV amplifier. Do not connect it via a
VCR (video cassette recorder). Some discs contain copy
prohibit signals. If such discs are played via a VCR, the copy
prohibit system may cause disturbance in the picture.
• Set the “TV TYPE” in “VIDEO SETUP” in “SETUP” to
comply with your TV’s video format. When the TV is NTSC
formatted set to NTSC. (See pages 36, 37.)
•To use with 5.1ch audio output, set “2CH (SRS OFF)” or
“2CH (SRS ON)” under “AUDIO CHANNEL” in “AUDIO
SETUP” on the “SETUP” menu to the initial settings.
(See page 38.)
• Set the “TV ASPECT” in “VIDEO SETUP” in “SETUP” to
comply with your TV’s aspect. (See page 36.)
•To use with video out or s-video output, set “INTERLACED”
in “VIDEO OUT” in “VIDEO SETUP” in “SETUP” at the
initial settings. (See pages 36, 37.)
NOTES: