Filter
Top Products
50
ENGLISH
3
4
SHARPNESS (MID) (–6 to +6) (Factory default: 0)
•This adjusts the sharpness of the image for the
intermediate frequencies.
SHARPNESS (HIGH) (–6 to +6) (Factory default: 0)
•This adjusts the sharpness of the image for the high
frequencies. (Only effective for progressive
images.)
HUE (–6 to +6) (Factory default: 0)
•This adjusts the balance between green and red.
(Not effective for progressive scan output nor
component output.)
CCS (0 to +3) (Factory default: 0)
•This performs removal of the color signal
component for images in which the color signal
component is mixed with the brightness signal.
(Only effective with progressive images.)
MEMORY 1
123
00
When Image Quality Adjustment 2 Is Selected and
Adjusted:
WHITE LEVEL (–5 to +5) (Factory default: 0)
• This adjusts the white level.
CHROMA LEVEL (–6 to +6) (Factory default: 0)
• This adjusts the density of the color.
CHROMA DELAY (–2 to +2) (Factory default: 0)
• This adjusts the shift of the brightness signal and the
color signal of the image. (Only effective for
progressive images.)
DNR (Digital Noise Reduction) (0 to +6) (Factory default: 0)
• This reduces video noise.
Remote control unit
5
When ENHANCER (ADJUSTMENT 3) is selected and
adjusted:
ENHANCER V (0 to +11) (Factory default: 0)
• This emphasizes the vertical contour of the image.
ENHANCER H (0 to +11) (Factory default: 0)
• This emphasizes the horizontal contour of the image.
Remote control unit
MEMORY 1
123
000
0