Filter
Top Products
52
ENGLISH
STD(STANDARD)
M1(MEMORY1)
M2(MEMORY2)
M3(MEMORY3)
M4(MEMORY4)
M5(MEMORY5)
SET(PIC SETUP)
1(ADJUSTMENT 1)
2(ADJUSTMENT 2)
3(ADJUSTMENT 3)
GAMMA
CONTRAST
BRIGHTNESS
SHARPNESS(MID)
SHARPNESS(HI)
HUE
CCS
WHITE LEVEL
CHROMA LEVEL
CHROMA DELAY
DNR
ENHANCER V
ENHANCER H
G0~G9
SETUP LEVEL
H.POSITION
V.POSITION
PICTURE MODE
✽
1 Only effective for progressive scan.
✽
2 Only effective for HDMI, DVI and
progressive scan.
• When HDMI and DVI signals are output,
the SHARPNESS (MID/HI), CHROMA
DELAY and Gamma correction settings
will have no effect.
✽
1
When the Display Position is Selected and Adjusted:
•Press the cursor button (ª), then select the
horizontal/vertical direction with the cursor buttons (
0,
1), set the adjustment value with the (•, ª) cursor
buttons, and press the ENTER button.
SETUP LEVEL (0 IRE, 7.5 IRE)
• This corrects floating black.
H. POSITION (–7 to +7) (Factory default: 0)
•A 15-step portion of position adjustment is permitted
left and right.
V. POSITION (–3 to +7) (Factory default: 0)
•A 11-step portion of position adjustment is permitted
up and down.
7
PICTURE MODE
STD M1 M2 M3 M4 M5 SET
PIC SETUP
SETUP LEVEL
0
0
0
✽
To exit the picture adjust mode
Press the PICTURE ADJUST button.
Remote control unit
✽
2
✽
1
✽
2
✽
2