Filter
Top Products
41
ENGLISH
3
w
When “DIGITAL OUT” is selected:
NORMAL (Factory default)
When playing DVDs recorded in Dolby Digital or DTS, bitstream signals
are output from the digital audio output terminals. When playing DVDs
recorded in linear PCM or packed PCM, linear PCM signals are output.
Select “NORMAL” when making digital connections to an AV
amplifier with built-in Dolby Digital and DTS decoder.
PCM
When playing Dolby Digital/DTS bitstream signals or DVDs recorded in
linear PCM or packed PCM, the signals are converted into 48 kHz/16-
bit PCM (2-channel) signals and output from the digital outputs. When
playing DVDs recorded in PCM, linear PCM signals are output.
e
When “LPCM (44.1 kHz/ 48 kHz)” is selected:
OFF (Factory default)
When playing linear PCM or packed PCM DVDs that are not
copyright-protected, for 2-channel PCM audio signals up to 96 kHz,
linear PCM signals are output as such without being converted from
the digital outputs. (176.2 kHz and 192 kHz signals are converted to
88.2 kHz and 96 kHz, respectively.)
For DVDs containing multi-channel PCM signals, the digital signals
are down-mixed for output into two channels, front left and right.
(Only the front left and right channels are output for sources for
which down-mixing is prohibited.)
When playing copyright-protected linear PCM or packed PCM DVDs,
in consideration of copyrights, no digital signals are output for
sources exceeding 48 kHz/16 bits. When playing such sources,
either set to “ON” or make analog connections. (See page 14.)
ON
Linear PCM and packed PCM signals are converted to 44.1 kHz or
48 kHz and output. (The PCM digital audio output signals are
converted to 48 kHz or less in consideration of copyrights.) When
making digital connections to an AV amplifier that is not compatible
with 96 kHz/88.2 kHz signals, set to “ON”.
r
When “SOURCE DIRECT” is selected:
OFF (Factory default)
Please set to OFF when performing speaker settings or setting the
delay time and playing back.
ON
Set to ON when playing back without performing the processing of
speaker settings. Performing this setting will result in the setting of
the DTS recommended all-channel, full bandwidth playback. (Note
that the volume of the sub woofer will increase by 5 dB, and there
will be an increase of 15 dB with a Super Audio CD.) This is also set
when playing back a 6-channel source of DVD audio that has been
recorded with all channels and full bandwidth. When set to “ON”,
the speaker size will be set to “Large” for all speakers and the sub
woofer will be set to “Yes”. When playing back software such as
this, perform the analog connections according to the software
instruction manual.
t
When “BASS ENHANCER” is selected:
OFF (Factory default)
No sound is produced from the subwoofer.
ON
Sound is produced from the subwoofer.
In the case, set the subwoofer to “YES” at the speaker settings.
✽
This works only with analog audio output.
✽
This does not work, at “SOURCE DIRECT” is on.
AUD IO SETUP
AUDIO CHANNEL
DIGITAL OUTPUT
LPCM(44.1kHz/48kHz)
BASS ENHANCER
SACD FILTER
SOURCE D IRECT
EXIT SETUP
COMPRESSION
DECISION:ENTER BUTTONSELECT :
ON
OFF
AUD IO SETUP
AUDIO CHANNEL
DIGITAL OUTPUT
LPCM(44.1kHz/48kHz)
BASS ENHANCER
SACD FILTER
SOURCE D IRECT
EXIT SETUP
COMPRESSION
DECISION:ENTER BUTTONSELECT :
ON
OFF
Remote control unit Remote control unit
AUD IO SETUP
AUDIO CHANNEL
DIGITAL OUTPUT
LPCM(44.1kHz/48kHz)
BASS ENHANCER
SACD FILTER
SOURCE D IRECT
EXIT SETUP
COMPRESSION
DECISION:ENTER BUTTONSELECT :
NORMAL
PCM
AUD IO SETUP
AUDIO CHANNEL
DIGITAL OUTPUT
LPCM(44.1kHz/48kHz)
BASS ENHANCER
SACD FILTER
SOURCE D IRECT
EXIT SETUP
COMPRESSION
DECISION:ENTER BUTTONSELECT :
OFF
ON