Filter
Top Products
21
ENGLISH
5
PART NAMES AND FUNCTIONS
(1) Front Panel
See page 3.
q
Power ON/STANDBY button
•Press once to set to the standby mode. The indicator
lights up in red.
•Press again to turn the power on. The indicator lights up in
green.
w
Power indicator
• This indicator lights when the power is on and when the
power is in the standby mode.
Light green: Power is on
Light red : Power is in the standby mode
e
Power switch
•Press once to turn the power on.
•Press again to set to the “OFF” position and turn the
power off.
r
DENON LINK indicator
• This indicator lights when the audio signals are transferred
by DENON LINK connections.
t
AL24 PLUS indicator
• This indicator lights when the audio signals of a DVD, etc.,
are being processed digitally with the AL24 processing
Plus.
y
Display
• Information on the disc that is currently playing is shown
on the display. (See page 22.)
u
Remote control sensor
i
SELECT of HDMI/DVI button
•Press this to set the video signal output from the HDMI
connector or the DVI connector. (See page 53.)
o
FORMAT of HDMI/DVI button
•Press this to set the video signal format from the HDMI
connector or the DVI connector. (See page 53.)
!0
VIDEO MODE button
• Use this to instantly change the adjustment mode of the
stored video signals.
The unit will return to the stored setting values when the
power is switched off.
(The setting values of this mode will not be stored.)
• PICTURE MODE
• PROGRE. MODE (PROGRESSIVE)
• TV TYPE
• SQUEEZE MODE
No effective for interlaced image. (See page 37.)
OFF ON
NTSCMULTI PAL
AUTO1 AUTO2 VIDEO1 VIDEO2 VIDEO3
STD M1 M2 M3 M4 M5
480P/576P 720P 1080i
HDMI Y Cb Cr HDMI RGB
HDMI/DVI OFF
DVI
!1
Select the playback area/layer of SUPER AUDIO
CD (SUPER AUDIO CD SETUP)
• Switch the area /layer of the Super audio CDS played with
priory.
• MULTI.......When playing Super audio CDs, the Multi
channel area is played with priory
• STEREO....When playing Super audio CDs, the stereo
channel area is played with priority.
•CD.............When playing Super audio CDs, the CDs layer
is played with priority.
!2
PURE DIRECT SELECT button
•Press to switch the modes with the specific video signals
and digital audio signals and indicate in display on and off.
(See pages 47, 48.)
!3
DVD/AUDIO/VIDEO logo
• This indicator lights when playing the DVD audio or DVD
video.
!4
Super Audio CD logo
• This indicator lights when playing the Super audio CD.
!5
Disc tray
• Load discs here. (See page 25.)
•Press the OPEN/CLOSE button
!6 to open and close the
disc tray.
• The disc tray is also closed when the PLAY button
!8 is
pressed.
!6
OPEN/CLOSE button (5)
•Press this to open and close the disc tray.
(See pages 25, 56.)
!7
STILL/PAUSE button (3)
•Press this to pause images or music or to play images
frame by frame. (See page 58.)
!8
PLAY button (1)
•Press this to play the disc. (See page 57.)
!9
STOP button (2)
•Press this to stop the disc. (See page 58.)
@0
Skip button (8)
•Press this to move back to the beginning of the current
track (or chapter). (See page 59.)
•Press again to move back to the beginning to the previous
track (or chapter).
@1
Skip button (9)
•Press this to move ahead to the beginning of the next
track (or chapter). (See page 59.)
@2
Slow/Search buttons (6 7)
•Press this to set the slow or search play mode.
(See pages 58, 59.)
6: search in the reverse direction.
7: search in the forward direction.
NORMAL MODE 1 MODE 2 ALL OFF
MULTI STEREO CD