Filter
Top Products
PageItem you want to set (* indicates the setting upon purchase)Description
PageItem you want to set (* indicates the setting upon purchase)Description
PageItem you want to set (* indicates the setting upon purchase)Description
ENGLISH
ENGLISH
13
Language setting
DIALOG
Set the audio language to be output.
ENGLISH* FRENCH
16
Table of initial settings
SPANISH GERMAN JAPANESE OTHERS
ENGLISH* FRENCH SPANISH GERMAN JAPANESE OTHERS
FRENCH SPANISH GERMAN JAPANESE OTHERSSUB TITLE
Sets the language of the subtitles displayed on the TV screen. 16
16
OFF
*
ENGLISH
DISC MENUS
Sets the language of the menus (top menu, etc.), recorded on the disc.
OSD LANGUAGE
Sets the language of the initial settings screen and the messages
displayed on the TV screen (“PLAY”, etc.).
ENGLISH* FRANÇAIS ESPAÑOL
HDMI RGB
SETTING
17
HDMI AUDIO
SETUP
Use this procedure to set the audio signals output from the HDMI
terminal.
NORMAL* ENHANCED
HDMI
SPEAKER
SETUP
(Can only be
set when
“MULTI
(LPCM)” is
selected)
The properties and components of the
different channels are set automatically
for the combination of speakers being
used.
Set the volume of the different
speakers so that the test tones output
from them sound to have the same
volume.
SPEAKER
CONFIGURATION
CHANNEL
LEVEL
DELAY TIME
FRONT SP
LARGE* /
SMALL
CENTER SP
LARGE* / SMALL
/ (NONE)
SUBWOOFER SURROUND SP CROSSOVER
40 / 60 / 80* / 100 / 120Hz
TEST TONE FRONT LCH CENTER FRONT RCH
SURROUND
RCH
DISTANCE
0 ~ 60ft (12ft*)
(0 ~ 18m (3.6m*))
0 ~ 60ft (10ft*)
(0 ~ 18m (3.0m*))
0 ~ 60ft (12ft*)
(0 ~ 18m (3.6m*))
ON
HDMI AUTO
FORMAT
Use this procedure to make the settings for the “AUTO” function
selected with the HDMI FORMAT button on the remote control unit.
DENON LINK
PANEL RES.* MAX RES.
OFF* 2nd 3rd
Set the DENON LINK terminal’s output according to the DENON
LINK version of the connected AV amplifier.
Digital interface settings
16
Use this procedure to set the digital RGB image range (data range)
output from the HDMI terminal.
2CH* MULTI (NORMAL) MULTI (LPCM)
YES* / (NO)
OFF / AUTO /
MANUAL
0 ~ –10dB (0dB*)
METERS /
FEET*
FRONT
LCH
DEFAULT
This is a parameter for optimizing the
timing at which the sound is output from
the speakers and subwoofer according to
their distance from the listening position.
17, 18
18
19
19
17
TV ASPECT
Set this according to the screen of the connected TV.
4:3 PS 4:3 LB WIDE (16:9)*
TV TYPE
Set this according to the video format of the connected TV.
NTSC PAL MULTI*
PROGRESSIVE* INTERLACED HDMI
OTHERS
AUDIO / VIDEO
SYNC
Set the video output to synchronize the audio signal.
COMPONENT
VIDEO OUT
Use this procedure to set the DVD-3930CI’s component video
output format.
PROGRESSIVE* INTERLACED
SQUEEZE MODE
Use this procedure to set the output picture when “WIDE (16:9)” is
selected at “TV ASPECT”.
OFF* ON
PROGRESSIVE
MODE
Sets the optimum progressive mode for the image material.
AUTO* VIDEO1 VIDEO2
PIXEL
CROPPING
Set the horizontal display range with respect to the interlaced output.
OFF* ON
Video setting
20
21
21, 22
22
20
21
AUTO
19
SURROUND
LCH
SUBWOOFER
FRONT
RCH
CENTER
SURROUND
LCH
SURROUND
RCH
SUBWOOFER
20
Making the initial settings
LARGE* / SMALL
/ (NONE)