Filter
Top Products
PAGE 2-1
This chapter provides step-by-step instructions for setting up your DIRECTV System and connecting it
to your television or entertainment system. As you are reading this now, it is assumed that you have
already opened and unpacked the box.
The receiver carton includes the receiver itself, an Access Card (already installed in the receiver behind
the door), a remote control with two AA batteries, cables, and this manual. Contact your dealer if any
part is missing or damaged.
You now need to decide where you want to place your digital satellite receiver. Avoid installing the
receiver in a location where the power cord or cables could be inadvertently disconnected. Obviously,
choose a place near your TV that is well ventilated. Do not set electronic components or other objects
(including this manual) on top of the receiver or otherwise block its cooling vents.
It is recommended that you have your dish professionally installed. This is due to safety issues,
electrical codes, and assurance of a quality installation. If you should choose to perform the
installation yourself, please pay special attention to the precautions in the front of this manual
and refer to the chapter “Installing and Pointing Your Satellite Dish." You may also want to
obtain the Do-It-Yourself Installation Kit, sold separately.
Choosing the Best Connections
There are a number of ways to connect your digital satellite receiver, depending on the other
audio/video equipment you wish to use. We will explain the simplest hookups.
SETTING UP YOUR
DIRECTV SYSTEM
2
The possible connections