DirecTV HIRD-B1 Satellite TV System User Manual


 
YOUR RECEIVER’S MENU SYSTEM
PAGE7-13
TurboTune™
The TURBOTUNE SETUP screen is used to specify the nine channels that will be offered in the
TurboTune pop-up panel that appears over video when is
pressed.
Things to do on the TURBOTUNE
SETUP screen
Set Channel
Using the , , , and keys, highlight one of the nine channel
boxes. You can enter the desired channel using the number keys on
the remote control, or by using the and . Pressing while
highlighting one of the channel boxes will also initiate a pop-up
panel that will allow you to set the channel using the and keys
on the remote control or the receiver’s front panel.
Installation
The INSTALLATION screen provides the utilities that makes the setup and testing of your system
simple and convenient.
Places to go from the INSTALLATION
screen
System Test
The System Test button takes you to the SYSTEM TEST screen.
Things to do on the INSTALLATION screen
The quality of the signal that your DIRECTV System is receiving is automatically displayed. In
addition to using this at installation time, you may also want to check it when you are experiencing
loss of signal, momentary video freezing, or similar problems.
Transponder #
You may choose to try different transponders. Each transponder transmits multiple programs at a time.
The transponder displayed when entering the screen represents the one associated with the last viewed
program (or “02” if no program has been viewed). By moving the highlight to the transponder area,
you can enter a number from 01 to 32. Different transponders may show varying signal strengths. This
is not indicative of any problem unless the variations are extreme (such as 40 and 90). In the event of
signal reception problems, customer service representatives may ask for information such as signal
strength on a different transponder. Do not change transponders trying to find the best signal since the
transponder will automatically change to the one that corresponds with the satellite channels that you
view.
Another signal strength utility that you may find useful is the Cable Test that can be found on the
SYSTEM TEST screen.
The TURBOTUNE setup screen
The INSTALLATION screen