Dynex DX-19E310NA15 Flat Panel Television User Manual


 
14
Dynex 19" LED TVDX-19E310NA15
www.dynexproducts.com
DVI (same as HDMI but requires an audio connection)
1 Make sure that your TV’s AC power adapter is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the adapter to
the DVI OUT jack on the cable or satellite box.
4 Connect the other end of the cable to the HDMI 1 (DVI) jack on the side of your TV.
5 Plug your TV’s AC power adapter into a power outlet, turn on your TV, then turn on the cable or satellite box.
6 Press INPUT to open the INPUT SOURCE list.
7 Press
or
to highlight HDMI1, then press ENTER.
Notes
Your TV supports DVI video only.
You must use the HDMI 1 (DVI) jack to connect a cable box
using DVI.
To add sound for a DVI connection, connect external speakers
or a sound bar to the cable or satellite box.
Cable or
satellite box
HDMI cable with
HDMI-DVI adapter
Side of TV
HDMI cable
connector
HDMI 1 (DVI)
jack
On your TV