Dynex DX-19E310NA15 Flat Panel Television User Manual


 
44
Dynex 19" LED TVDX-19E310NA15
www.dynexproducts.com
Adjusting the sound
Adjusting sound settings
1 Press MENU. The on-screen menu opens.
2 Press
or
to highlight Audio, then press
. The
Audio menu opens.
3 Press
or
to highlight an option, then press
or
to adjust the option. You can select:
Sound Mode—Selects the sound mode. You can
select:
Standard—Balances treble and bass. This
setting is good for watching standard TV
broadcasts.
Theater—Enhances treble and bass for a rich
sound experience. This setting is good for
watching DVDs, Blu-ray discs, and HDTV.
Music—Preserves the original sound. This
setting is good for listening to music.
News—Enhances vocals for TV audio. This
setting is good for watching news broadcasts.
Custom—Lets you manually adjust sound
settings.
Treble—Adjusts the high sounds.
Bass—Adjusts the low sounds.
Balance—Adjusts the balance between the left
and right audio channels.
Digital Audio/SPDIF—Sends digital audio to an
external audio system. You can select PCM (to
output audio in 2-channel stereo), or RAW (to pass
through the original digital audio sound).
Audio Language—(Digital channels only) Selects
an alternate audio language, if available.
MTS/SAP—(Analog channels only) Selects the
audio mode. You can select:
Mono—Select this option if there is noise or
static on weak stereo broadcasts.
Stereo—Select this option for programs
broadcast in stereo.
SAP—Select this option to listen to a
secondary audio program, if available.
Reset Audio Settings—Reset all audio settings to
factory defaults.
4 Press MENU to return to the previous menu, or press
EXIT to close the menu.
Playing TV audio only
You can turn off the picture on your TV and listen to the
program audio only.
1 Press MENU. The on-screen menu opens.
2 Press
or
to highlight Audio, then press
or
ENTER. The Channels menu opens.
3 Press
or
to highlight Audio Only, then press
or
to select On.
4 Press MENU to return to the previous menu, or press
EXIT to close the menu.
Note
You can also press MTS/SAP one or more
times to select the audio mode.
Notes
The picture turns off in about five
seconds.
Audio Only works only when the
input source is TV, and your TV is
receiving a broadcast signal.
To exit audio only mode, press any
button. When you exit audio only
mode, the Audio Only option is
automatically reset to Off.