Dynex DX-19E310NA15 Flat Panel Television User Manual


 
54
Dynex 19" LED TVDX-19E310NA15
www.dynexproducts.com
5 If you select Custom, press
or
to highlight
Custom Label, then press
.
6 Press
or
to select a character.
7 Press
to move to the next position. Repeat this
step to enter additional characters. You can enter as
many as 10 characters. If you need to delete a
character, enter a blank space.
8 When you complete the label, press MENU. The next
time you press INPUT, the new label appears in the
INPUT SOURCE list.
9 Press EXIT to close the menu.
Changing channel settings
Automatically scanning for channels
When you scan for channels, your TV searches for
channels with signals and stores the channel
information in the channel list. When you press CH+ or
CH–, your TV goes to the next or previous channel in the
channel list.
If the TV signal source changes, for example you change
from an outdoor antenna to cable TV (no box), you need
to scan for channels.
1 Press MENU. The on-screen menu opens.
2 Press
or
to highlight Channels, then press
or
ENTER. The Channels menu opens.
3 Press
or
to highlight Auto Channel Scan, then
press ENTER. The Choose Your TV Source screen
opens.
4 Press
or
to highlight Antenna, Cable, or
Cable/Satellite Box, then press ENTER.
If you are using an antenna for a standard or HD TV
signal, select Antenna. Your TV scans for available
channels. The scan may take several minutes.
During scanning your TV searches for digital
channels first. When the digital channel search is
complete, a message appears asking if you want to
search for analog channels. Select Ye s to continue
searching for analog channels, or select No to stop
searching for channels.
If your cable is connected directly to the TV
(without a box), select Cable. Your TV scans for
available channels. The scan may take several
minutes.
If your cable or satellite TV is connected to your TV
through a box, select Cable/Satellite Box. Your TV
does not need to scan for channels. A message
tells you to select the correct input source. Press
INPUT, press
or
to highlight the video input
you connected your TV to, then press ENTER.
Note
You can press EXIT to stop the auto
channel search, but you will need to run
the auto channel search again to create a
channel list.