Dynex DX-19E310NA15 Flat Panel Television User Manual


 
62
Dynex 19" LED TVDX-19E310NA15
www.dynexproducts.com
Outputs
Audio
Power
Miscellaneous
Programming universal
remote controls
You can operate your Dynex TV with a new or existing
universal remote control.
1 See the table below for common codes. If you have
problems programming your remote or need a
different remote control code, visit
www.dynexproducts.com/remotecodes for the
latest remote control code information.
2 Follow your universal remote control’s instructions
to enter the TV code you found in Step 1.
For additional help and information
Visit http://www.dynexproducts.com/remotecodes
Call technical support for the universal remote control
or cable/satellite company of the remote/set-top box
you are trying to program.
Call the Dynex Customer Care Center 1-800-305-2204
Common universal remote control codes
The following is a list of the most common remote
control codes. Codes for other remote controls are
available online at:
www.dynexproducts.com/remotecodes, or check with
your cable or satellite TV provider for the remote control
code.
Video No
Analog audio/Headphone 1 (side)
Digital audio 1 (coaxial) (side)
WiFi No
Ethernet No
Speakers
Number: 2
Watts per channel: 2.5W
Power consumption
On: 30W
Standby: <1W
Power input DC 12V, 2.5A
OSD languages English, French, Spanish
INlink No
Game Mode No
ENERGY STAR qualified No
Internet connectable No
TV base screws M4 type (8 mm length) (4 pcs)
V-Chip (version 2.0) Ye s
Sleep timer Ye s
Channel labeling Ye s
VESA mount (mm)
(horizontal × vertical)
100 × 100
VESA mount screws M4 type
Note
The length of the wall-mount screws vary
depending on the wall-mount bracket you
purchased. See the instructions that came
with the wall-mount bracket for screw
lengths.
Tips
If your universal remote control has a
code search feature, run a code search
to identify a code that matches your
TV. See your universal remote control’s
instructions for details.
If your universal remote control has a
“Learn” feature, you can manually
program it using the Dynex TV remote
to “teach” the commands one at a
time. See your universal remote
control’s instructions for details.
Notes
This note only goes with TV/Blu-ray or
TVs.
The following codes may not provide
full functionality. You may need to use
the remote control that came with
your TV, especially to control the
Blu-ray or DVD functions.