Dynex DX-19E310NA15 Flat Panel Television User Manual


 
26
Dynex 19" LED TVDX-19E310NA15
www.dynexproducts.com
DVI
1 Make sure that your TV’s AC power adapter is unplugged and the computer is turned off.
2 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the adapter to
the DVI OUT jack on the computer.
3 Connect the other end of the cable to the HDMI 1 (DVI) jack on the side of your TV.
4 Plug your TV’s AC power adapter into a power outlet, then turn on your TV and the computer.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
or
to select HDMI1, then press ENTER.
7 Adjust the display properties on the computer, if necessary.
Notes
Your TV supports DVI video only.
You must use the HDMI 1 (DVI) jack to connect a computer
using DVI.
To add sound for a DVI connection, connect external speakers
or a sound bar to the computer.
HDMI cable
connector
HDMI 1 (DVI)
jack
On your TV
HDMI cable with
HDMI-DVI adapter
Side of TV