Dynex DX-19E310NA15 Flat Panel Television User Manual


 
Dynex 19" LED TV
35
DX-19E310NA15
www.dynexproducts.com
A If you are using an antenna for a standard or HD
TV signal, select Antenna. Your TV scans for
available channels. The scan may take several
minutes. During scanning your TV searches for
digital channels first. When the digital channel
search is complete, a message appears asking if
you want to search for analog channels. Select
Ye s to continue searching for analog channels, or
select No to stop searching for channels.
B If your cable is connected directly to the TV
(using no tuner box), select Cable. Your TV scans
for available channels. The scan may take several
minutes.
C If your cable or satellite TV is connected to your
TV through a tuner box, select Cable/Satellite
Box. Your TV does not need to scan for channels.
A message tells you to select the correct input
source. Go to the next step.
4 To watch TV, press INPUT, press
or
to highlight
the video input source for your TV in the INPUT
SOURCE list, then press ENTER.
If your TV is connected to an antenna, cable TV (no
box), or cable or satellite TV box using a coaxial
cable, select TV.
If your TV is connected to a cable or satellite box
using an HDMI cable or HDMI cable with a DVI
adapter, select HDMI1 or HDMI2.
If your TV is connected to a cable or satellite box
using a component video cable, select COMP/AV.
If your TV is connected to a cable or satellite box
using a composite video cable, select COMP/AV.
Understanding the basics
Turning your TV on or off
1 Make sure that the AC power adapter is connected
to a power outlet.
2 Press (power) to turn on your TV. The power
indicator LED turns off.
3 Press (power) again to turn off your TV. Your TV
enters Standby mode and the power indicator turns
red.
Selecting the video input source
1 Turn on your TV.
2 If you want to use a device connected to a video
input (such as a DVD or Blu-ray player), turn on the
device.
3 Press INPUT. The INPUT SOURCE list opens.
4 Press
or
to highlight the video input source,
then press ENTER.
Note
The channel scan can take up to 20+
minutes. You can press EXIT to stop the
auto channel search, but you will need to
run the auto channel search again to
create a channel list.
Warning
When your TV is in standby mode, it is still
receiving power. To completely disconnect
power, unplug the AC power adapter.
Note
If your TV does not receive an input signal
for several minutes, it automatically goes
into standby mode.