Dynex DX-19E310NA15 Flat Panel Television User Manual


 
34
Dynex 19" LED TVDX-19E310NA15
www.dynexproducts.com
Turning on your TV for the first
time
The first time you turn on your TV, the Setup Wizard
opens. The Setup Wizard guides you through setting up
basic settings including the menu language, time
setting, picture mode, and the TV signal source.
1 Make sure that you have:
Installed the remote control batteries. (See page 33
for details.)
Connected an antenna, cable TV, or satellite TV.
(See page 13 through 18 for details.)
Connected the AC power adapter. (See page 32 for
details.)
2 Press (power) to turn on your TV. The Choose Your
Menu Language screen opens.
3 Press
or
to highlight the language you want,
then press ENTER. The Choose Your Time Setting
screen opens.
4 Press
or
to highlight Mode, then press
or
to
select Manual (to set the date and time manually) or
Auto (to set the date and time automatically from a
TV signal source based on the time zone you select).
5 If you selected Auto for Mode, press
or
to
highlight Time Zone, then press
or
to select
your time zone. You can select Eastern, Central,
Mountain, Pacific, Alaska, Hawaii, Newfoundland,
or Atlantic.
6 If you selected Auto for Mode, press
or
to
highlight Daylight Savings, then press
or
to
select On (if your viewing area observes Daylight
Savings Time) or Off (if your viewing area does not
observe Daylight Savings Time).
7 If you selected Manual for Mode, set the date by
pressing
or
to highlight Ye a r, Month, or Day,
then pressing
or
to adjust the setting.
8 If you selected Manual for Mode, set the time by
pressing
or
to highlight Time, then pressing
or
to select the hour, minute, or AM/PM field. Press
or
to adjust the setting.
9 Press ENTER. The Choose Your Picture Mode screen
opens.
10 Press
or
to highlight Home Mode or Retail
Mode, then press ENTER.
If you selected Retail Mode, a message asks you to
confirm your selection. Retail Mode is not an energy
savings mode. Select Ye s to continue using Retail
Mode, or select No to change your selection, then
press ENTER.
The Choose Your TV Source screen opens.
11 Press
or
to highlight Antenna, Cable, or
Cable/Satellite Box, then press ENTER.
Note
If you select Auto, the displayed time will
be incorrect until your TV gets the correct
time from a TV signal source.