Filter
Top Products
20 Setting Up the Projector
Making Other Connections
Connect the power cable and other cables described below, depending on how you plan to
use the projector.
■ Plug the power cable into the projector and a grounded electrical outlet.
■ To use an AV controller with the projector, connect a 9-pin null modem serial cable to
the
RS-232C port.
■ To connect to a digital camera, flash drive, or storage device, connect the USB cable that
came with your device to both your device and to the projector’s USB port. For
information on using the projector’s Slideshow feature, see page 30.
pl3010_3010e_UG.book Page 20 Wednesday, September 7, 2011 6:28 PM