Filter
Top Products
Problem Solving 73
■ If the function key doesn’t let you display simultaneously on both screens, you might
need to use the Display utility in the Windows Control Panel to make sure that both the
LCD screen and external monitor port are enabled. From the Windows Control Panel,
open the
Display utility. In the Display Properties dialog box, click the Settings tab,
then click
Advanced. The method for adjusting the setting varies from computer to
computer; you may need to click a
Monitor tab, then make sure the external Monitor
port is set as your primary display or enabled. See your computer manual or online help
for details.
If you’re using Mac OS X:
1. Open the
System Preferences utility and select Displays.
2. Select the
VGA Display or Color LCD option, if necessary.
3. Click the
Arrange or Arrangement tab.
4. Check the
Mirror Displays checkbox. (See your computer manual for details.)
The picture is upside-down or reversed.
Change the
Projection setting in the Settings menu (see page 54).
The picture isn’t rectangular.
■ If the image looks like or , the projector has been placed off to one side of the
screen and angled toward it. Face the projector straight ahead (instead of at the center of
the screen), then use the horizontal keystone slider to correct the image (see page 24).
■ If the image looks like or , make sure the projector is not tilted up or down, then
use the vertical keystone buttons to adjust the image (see page 24).
The picture contains static or noise.
■ Make sure the Input Signal is set correctly for your connected video equipment (see
page 54).
■ If you’re viewing still images and you notice flickering or horizontal lines, turn on the
Progressive setting (see page 42).
■ Make sure your cables are securely connected at both ends.
■ If you’re using an extension cable, you may pick up interference if the cable is not
adequately shielded. You may need to use a signal amplifier for longer cables.
■ If you’re displaying the same image on your computer and projector screen, try turning
off your laptop’s LCD display (see page 72).
pl3010_3010e_UG.book Page 73 Wednesday, September 7, 2011 6:28 PM