Filter
Top Products
26
ENGLISH
Advanced feature for presentation (Continue)
Expand
By pressing the EXPAND button on the remote con-
trol, you can view the detailed image of the picture.
Setting the Expand mode
1. Press the MENU button once to display the on-
screen menu.
2. Press the or buttons on the control panel (or
$ or % buttons on the remote control) to select
PinP/EXPAND.
3. Press the ª or º buttons on the control panel (or
{ or } buttons on the remote control).
4. Press the or buttons on the control panel (or
$ or % buttons on the remote control) to select
ZOOM MODE, POSITION or SIZE.
5. Press the ª or º buttons on the control panel (or
{ or } buttons on the remote control) to set the
ZOOM MODE, POSITION or SIZE.
Normal picture
Actual size picture
Zooming picture
(ZOOM MODE1)
(ZOOM MODE4)
Zooming picture
(ZOOM MODE3)
(ZOOM MODE2)
ZOOM MODE
Zooming picture
Normal
picture
6. Press the MENU button twice to exit the menu sys-
tem.
Using the Expand mode
1. Press the EXPAND button.
A red frame indicating EXPAND area will appear.
• You can magnify different areas of the active pic-
ture by pressing the ª , º, or buttons on
the control panel (or {, }, $ or % buttons on the
remote control).
• You can change the magnification of the zoomed
area by pressing the + or - buttons.
2. Press the EXPAND button again.
• In EXPAND mode, do not display the test pattern.
• In EXPAND mode (except in type 4 mode) you can-
not adjust the zoom/focus.
• Display enlargement does not work with video
input or S-video input.
• The red frame indicating EXPAND area will
disappear when the cursor is selected.
Indication Mode 4 (actual size display)
• Pressing the ª , º, , buttons on the
control panel (or { , } ,$, % buttons on the
remote control) is for adjusting fine adjust, zoom
or focus.
• The expanding rate cannnot be changed either
pressing + or - button.
Super impose (Picture in Picture)
One of the special features of this unit is the picture-
in-picture (PinP) mode. PinP allows you to view differ-
ent sources at the same time. The sub image will be-
come a still picture.
1. Press the PinP button on the remote control.
• Pressing the PinP button repeatedly will select
on and off.
2. Select the desired external input source of the sub
image by using the RGB, VIDEO or CARD button.
• You can change the frame position and the frame
size by using the on-screen menu.
To recapture the picture of sub screen
3 Press the – or + button.
• By each press of the button will recapture the
picture of sub screen.
To switch Main image and sub image
4 Press the or buttons on the control panel (or
$ or % buttons on the remote control).
To switch still picture and playback picture between
Main image and Sub image
5 Press the ª or º buttons on the control panel
(or { or } buttons on the remote control) .
6. Press the PinP button on the remote control.
The sub image will be disappear.
• In PinP mode, the sub image will become still
pictures. When the main image is set to PC1 or
PC2, the sub image will become moving pictures.
• In PinP mode, the sound of the moving pictures will
be heard.
• The sub image may vibrate. If this is the case, select
the image again by pressing the ‘-’ button.
• In PinP mode you cannot adjust the zoom/focus.
• Ajusting contrast, brightness, tint or color isn't
available in PinP mode.
• To use different PC card (PC card 1, PC card 2) on
both Main image and Sub image is not available.
• When the main and sub images are set to PC1 or
PC2, images can be selected only from the same
group of the same PC-CARD.
• By setting the AUTO PIP on the PinP/EXPAND
menu to ON, the position of the sub image will
move automatically when the red frame indicating
the EXPAND area overlap with the sub image.