Epson LVP-X200A Projection Television User Manual


 
7
ENGLISH
PC analog RGB input
Use to input video signals (analog
RGB) of a personal computer.
(Pin assignment of Mini D-SUB 15P jack)
PIN NO. SPEC PIN NO. SPEC
1 R(RED)/CR 9—
2
G(GREEN)/Y
10 GROUND
3
B(BLUE)/CB
11 GROUND
4 GROUND 12
5 GROUND 13 HD/CS
6 GROUND 14 VD
7 GROUND 15
8 GROUND
15
11
6
10
15
RS-232C input
Connect here when you control this Projector with a
personal computer using PCGC (personal computer
graphic controller) or with a remote controller using
SpacePointer function.
RS-232C 1 input (D-SUB 9P)
The Pin assignment is DTE (Data Terminal
Equipment) type.
Please use RS-232C crossover cable pro-
vided.
1
69
5
PIN NO.
CODE
NAME I/O NOTE
1 CD Carrier Detect IN not connected
2 RD Receive Data (RXD) IN
connected to inner circuit
3 SD Send Data (TXD) OUT
connected to inner circuit
4ER
Equipment Ready(DTR)
OUT not connected
5 SG Signal Ground
connected to inner circuit
6DR
Data Set Ready(DSR)
OUT not connected
7RS
Request to Send(RTS)
OUT not connected
8 CS Clear to Send (CTS) IN not connected
9 RI Ring Indicator IN not connected
PIN NO.
CODE
NAME I/O NOTE
1RS
Request to Send(RTS)
OUT not connected
2 CS Clear to Send (CTS) IN not connected
3 SD Send Data (TXD) OUT
connected to inner circuit
4 SG Signal Ground
connected to inner circuit
5 RD Receive Data (RXD) IN
connected to inner circuit
6 not connected
7 not connected
8 not connected
8
1
6
2
5
3
RGB2 IN
RGB OUT
LINE-OUT
AUDIO
AUDIO
MAIN
VIDEO
AC IN
L
R
INPUT1 INPUT2
RS-232C 2
OI
S-VIDEO
RS-232C 1
RGB1 IN
PC card insert slot
This is where you insert the PC card.
See page 27.
power jack
MAIN power
I : ON
O : OFF
RS-232 2 input (Mini DIN 8P)
Connects to personal computer when using
SpacePointer (RGB2 IN). See page 37.
PC analog RGB output
(mini D-SUB 15P)
Use to output RGB signal from
RGB1 OR RGB2 input. See pages
13 - 15.
PC audio input (stereo mini jack)
Use to input PC audio signals. See pages
13 - 15.
PC analog RGB input (mini D-SUB 15P)
Use to input RGB signal for PC. See pages
13 - 15.
RS-232 1 input (D-SUB 9P)
Connects to personal computer
when using SpacePointer (RGB1
IN), accessory PCGC and so on.
See pages 35 and 37.
PC card eject
Press to eject the PC card. See page 27.
video/audio input
Use to input video and
audio. See page 12.
line output
Use to output PC audio if PC audio in, or
Audio input 1 or 2 is connected. See pages
12 - 15.
RGB2 IN
RGB OUT
LINE-OUT
AUDIO
AUDIO
MAIN
VIDEO
AC IN
L
R
INPUT1 INPUT2
RS-232C 2
OI
S-VIDEO
RS-232C 1
RGB1 IN
RS-232C 2 input (Mini DIN 8P)
Please use RS-232C crossover cable and MAC
adaptor for RS-232C cable provided.
(Pin assignment of D-SUB 9P)