Filter
Top Products
EPHD04+ HDcctv DVR
17
5. To change the IP address, double-click the IP Address of the DVR. Type a new IP address
and then click Set IP Address to save the settings.
Figure 2-16
You can also change the other settings by double-clicking the values. After configuring the
values, click Save Configuration.
Note: Most networks uses DHCP to assign IP address, if you are unsure of your network
settings, please consult your network administrators for configuration details.
6. To access the DVR, highlight the DVR and click Connect to Selected IP. The Internet
Explorer window pops up.
7. Type the user ID and password to log in. The Live View window of the DVR appears.
Note:
1. You might be required to download ActiveX for viewing the camera feed. If asked,
click Yes.
2. For details on the Live View window, please refer to 7. Remote Access to the DVR.