Filter
Top Products
EPHD04+ HDcctv DVR
31
3.3.3 Audio Selection
In order to utilize the audio function, please follow the instructions below before switching on
the audio function.
Note: The Audio function is unavailable for Germany.
1. Connect the audio source and/or audio output amplifier to the DVR.
2. Enable the Record Audio option in the Camera Setting menu.
Figure 3-3
Note that the DVR only provides one audio output. You can switch the Audio Output function
to either one from the four cameras. To switch the Audio Output function to the desired
camera by:
Using a mouse: On the bottom of the screen, click the Audio icon to switch the Audio
Output function to the desired camera or disable the Audio Output function.
Using the front panel buttons:
1. Turn the Jog / Shuttle wheel to the desired camera.
2. Press the Enter button. An Audio icon will be displayed on the upper-left corner on the
selected camera. To display function icons on the Live View window, please refer to 4.3
Display.
3. If you want to disable the Audio Output function on the selected camera, press the Enter
button again, the Audio icon will disappear.