Filter
Top Products
110 | Performance Series DVR User Guide
www.honeywellvideo.com
3. The RS-232 port can be used in two ways:
• Parameter Control: Connect a PC to the HRG DVR using the PC serial port. You can
then set device parameters using software such as HyperTerminal. The serial port
parameters must be the same as the DVR's when connecting with the PC serial port.
• Transparent Channel: Connect a serial device directly to the HRG DVR. The serial
device will be controlled remotely by the PC through the network and the protocol of
the serial device.
Managing User Accounts
By default your Performance Series DVR is configured with the user name of admin and
password 12345. The Administrator has the authority to add, delete, or configure the user
parameters.
Adding a New User
To add a new user:
1. Click Menu Settings User to enter the User Settings menu (see Figure 12-4).
Figure 12-4 User Settings Menu
2. Click Add to enter the Add User menu (see Figure 12-5).
You can add up to 31 users.