Filter
Top Products
96 | Performance Series DVR User Guide
www.honeywellvideo.com
Figure 9-7 Patrol Management Menu
Customizing Patterns
Patterns can be set up by recording the movement of the PTZ.
To set up and call PTZ patterns:
1. Open the PTZ Control panel (Figure 9-3), by clicking PTZ in the mouse menu or by
pressing PTZ on the front panel of the DVR.
2. Click Pattern to enter the Pattern Management menu (see Figure 9-8).
Figure 9-8 Pattern Management Menu
3. Select a Pattern Number.
4. To record a new pattern, click Run Record to start recording the movements of the PTZ.
Use the PTZ control panel to move the PTZ. The PTZ movements are recorded until Stop
Record is clicked.
5. To run a pattern, click Run Pattern on a valid pattern.
The PTZ moves according to the path that was defined until Stop Pattern is clicked.
6. Click OK to exit the menu.