Filter
Top Products
800-12005V1 - A - 08/2012
Introduction | 27
HRG4 Front Panel
Figure 1-2 HRG4 Front Panel
Table 1-1 HRG4 Front Panel Controls and Indicators
Position Control/Indicator Function
1 Status Indicators
POWER Turns green when the HRG DVR is on.
STATUS Illuminates when the compound key switches to numeric/letter input mode.
Tx/Rx Flickers green when the network connection is functioning normally.
2 IR Receiver Sensor for IR Remote Controller.
3 Compound Buttons
1/MENU Enter number “1”; Access the main menu.
2/ABC/F1 Enter number “2” or letters “A”, “B”, “C”; The F1 button when used in a list field will
select all items on the list. In PTZ Control mode, it will turn on/off PTZ light.
3/DEF/F2 Enter number “3” or letters “D”, “E”, “F”; The F2 button is used to cycle through tab
pages. It will also bring up the Channel and OSD Position settings.
4/GHI/ESC Enter number “4” or letters “G”, “H”, “I”; Exit and back to the previous menu.
5/JKL/EDIT Enter number “5” or letters “J”, “K”, “L”; Delete characters before cursor; Select the
check box and ON/OFF switch; Start/stop record clipping in playback.
6/MNO/PLAY Enter number “6” or letters “M”, “N”, “O”; Playback, for direct access to playback
interface.
7/PQRS/REC Enter number “7” or letters “P”, “Q”, “R”, “S”; Manual record, for direct access to
manual record interface; manually enable/disable record.
8/TUV/PTZ Enter number “8” or letters “T”, “U”, “V”; Access to PTZ control interface.
9/WXYZ/PREV Enter number “9” or letters “W”, “X”, “Y”, “Z”; Multi-camera display in live view.
0/A Enter number “0”; Switch between input methods (upper and lowercase alphabet,
symbols and numeric input).
4SHIFT Switches the compound keys functions from inputting the numeric/letter values to
the functional controls.
5 Control Buttons Directional buttons: In menu mode, the direction buttons are used to navigate
between different fields and items and select setting parameters. In playback mode,
the Up and Down buttons are used to speed up and slow down record play, and the
Left and Right buttons are used to select the recording 30s forwards or backwards.
In Live View mode, these buttons can be used to cycle through channels.
Enter: The Enter button is used to confirm selection in the Menu mode; or used to
select check box fields and ON/OFF switch. In playback mode, it can be used to
play or pause the video. In single-frame play mode, pressing the Enter button
advances the video by a single frame. And in auto sequence live view mode, the
buttons can be used to pause / resume auto sequence.
6 USB Port Connection for a USB mouse or USB flash memory device.
12 334 56