Filter
Top Products
5-47MLC 52 Series MediaLink Controllers • Serial Communication
Initial configuration options screen
Resetting
Using the configuration software, you can reset the MLC 52 to its factory
defaults — the original values and settings with which the MLC was delivered.
(See “Factory defaults” on page 5-37.)
The Total Factory Reset option is not available in emulation mode.
To reset to factory defaults,
1. From the File menu, select Total Factory Reset.
File menu, Total Factory Reset selected
2. The following confirmation prompt appears, asking if you want to save
your current configuration before uploading the firmware.
Reset to factory defaults confirmation prompt