Filter
Top Products
2-7MLC 52 Series MediaLink Controllers • Installation
Wall opening
flush with
edge of box
Installation
Cable
Cable Clamp
Screws or Nails
Wall Stud
Attaching a wall box to a wall stud
• If you are attaching the wall box to wood, use four #8 or #10 screws or
10-penny nails. A minimum of ½ inch (1.3 cm) of screw threads must
penetrate the wood.
• If you are attaching the wall box to metal studs or furniture, use four #8 or
#10 self-tapping sheet metal screws or machine bolts with matching nuts.
• If you are using a mounting bracket (mud ring) with the wall box, follow
the directions included with the bracket to attach the clips that fasten the
bracket to the wall or furniture.
8. If desired, replace the faceplate and/or button labels on the MLC. (See
“Replacing the Faceplate and Button Labels,” earlier in this chapter.)
9. Cable and test the MLC before fastening it into the wall box, mounting
bracket, or furniture.