Filter
Top Products
7
2 - Quick Tour
FRONT PANEL
1 POWER
Press to power the VCR on and off.
2 DECK SELECT
Press to switch control between
Deck 1 and Deck 2.
3 COPY TAPE
Press to copy the tape in Deck 1 to
the tape in Deck 2 (see page 10).
4CH
Press to select the next or previous
channel.
5 TV/VCR
Press to switch back and forth
between the TV tuner and the VCR
tuner.
6 MENU
Press to display the VCR’s Main
Menu.
7 REC
Press to start recording in the active
deck. Press repeatedly to add
recording time in 30-minute incre-
ments (see page 14).
8 REWIND
While the VCR is stopped, press to
rewind the tape in the active deck.
While a tape is playing, press to
visually search backward (Review). In
the menu system, press to return to
the previous menu.
9 STOP/EJECT
Press once to stop the tape in the
active deck. Press twice to eject the
tape. In the menu system, press to
move the blinking selection arrow
down.
10 PLAY
Press to play the tape in the active
deck. While a tape is playing or
recording, press to pause the tape
in the active deck. In the menu
system, press to move the blinking
selection arrow up.
11 FAST-FORWARD
While the VCR is stopped, press to
fast-forward the tape in the active
deck. While a tape is playing, press
to visually search forward (Cue). In
the menu system, press to make
selections.
12 AUDIO/VIDEO INPUT (AUX)
Connect to the composite video
output (yellow) and audio output
(white) of an external component,
such as a camcorder or videogame,
using RCA cables.
The following is an overview of the Dual-
Deck VCR front panel.
Power
Ch
Rec
Deck Select
MenuTV/VCR
Copy
VCR
Video Audio
DDV2001
12345678
9
10
11
12
NOTE
• Aux Input Labeling - Throughout the menu system, the audio/video input is referred to as “Aux.” To
change this label to match the component you have connected, see page 34.