GoVideo DDV9475 VCR User Manual


 
INITIAL SETTINGS 5
2 - Initial Settings
Set Language
Press 1, 2, or 3 to select English, French, or Spanish. To
change the language at any other time, see page 6.
Auto Setup
1
2
The first time you hook up and
turn on your Dual-Deck VCR,
it will run Auto Setup. First,
you will be prompted to select
the on-screen language, then
the Dual-Deck VCR will
automatically search for
channels and set the VCR’s
internal clock.
Searching for Channels
And Setting Clock
Please Wait . . .
LANGUAGE / LANGUE / IDIOMA
1 English
2 : Français
3 : Español
Select = 1 - 3
Choisir = 1 - 3
Elegir = 1 - 3
Run Auto Setup
As soon as you set the language, the VCR will automati-
cally perform the following steps:
Auto Channel Search — Automatically detects
whether you have an antenna or cable, then searches
for all channels in your area. If Auto Setup is unable to
search for channels in your area, you may do so at
any time; see page 30.
Auto Time Set — Sets the VCR’s internal clock. If Auto
Setup is unable to find a clock set channel in your
area, you can set the clock manually; see page 7.
This procedure may take a few minutes to complete, at
which point it will tune the VCR to the lowest channel
found.
Auto Setup is Complete!
Proceed to Chapter 3 for an overview of the Dual-Deck
System.