GoVideo DDV9475 VCR User Manual


 
TUNER AND CHANNEL LIST 31
Add Channel
Follow these steps to add a
channel that was not detected
during Auto Channel Search.
1
2
3
Open “Setup Menu”
Press and hold the Menu button for 3 sec-
onds.
Select “Tuner & Channel List”
Press 3.
Select “Add Channel”
Press the down arrow until Add Channel is
selected.
Tune the Channel
Use the number keys (0-9) to enter the
channel number, e.g. “1-1” for Channel 11.
Add the Channel
Press the right arrow to add the channel to
your channel list. Repeat steps 4 and 5 to add
more channels.
SETUP MENU
1 Set Clock Menu
2 : Copy/Record Settings
3 : Tuner And Channel List
4 : Dual-Deck Features
5 : Reset Factory Settings
____________________________________
/ = Move = Sel MENU=Quit
TUNER AND CHANNEL LIST
CH ##
Tuner Band Auto
Auto Channel Search
Add Channel
Remove Channel
Show Weak Channels No
Tuner Audio Stereo
____________________________________
/ = Move = Sel MENU=Quit
4
5
TUNER AND CHANNEL LIST
CH ##
Tuner Band Auto
Auto Channel Search
Add Channel
Remove Channel
Show Weak Channels No
Tuner Audio Stereo
____________________________________
/ = Move = Sel MENU=Quit
TUNER AND CHANNEL LIST
CH 11
Tuner Band Auto
Auto Channel Search
Add Channel
Remove Channel
Show Weak Channels No
Tuner Audio Stereo
____________________________________
/ = Move = Sel MENU=Quit
TUNER AND CHANNEL LIST
CH 11
Tuner Band Auto
Auto Channel Search
Add Channel
Remove Channel
Show Weak Channels No
Tuner Audio Stereo
____________________________________
/ = Move = Sel MENU=Quit