GoVideo DDV9475 VCR User Manual


 
62 DDV9475 USERS GUIDE
Tape Missing
No videotape in Deck 2.
• Insert a videotape in Deck 2.
Tape Missing Tab
No Record Safety Tab in videocassette.
• Insert a video cassette with the record safety
tape intact, or place a small piece of adhesive
tape over the opening to permit recording.
Not Ready
Deck 2 is not in Stop mode (i.e. it is playing,
rewinding, etc.).
• Press Stop on Deck 2.
Overlapping Events
Two or more events are programmed to occur at
the same time:
• When you program a new event, the VCR
checks all timer events for conflicts. If two
events overlap, you will be prompted to either
delete one of the events, or allow them to
overlap.
• If events overlap, the first event will be
completely recorded, then the next event
starts and the remainder of that event is
recorded.
Timer Recording Errors
If there is a problem with your
Timer Recording, the word
Timer will flash on the Front
Panel Display and an error
message will appear on the
On-Screen Display. Once you
correct the error, the event will
begin if there is still time
remaining for that event.
Copy Tape
Power
Deck SelectRecordRewind Play F. ForwardPauseStop
/
Eject
Hi-Fi
Deck
Hi-Fi
Deck
DDV9475
Record Safety Tab
TIMER EVENTS OVERLAP
1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16
Please review the events
from the Select Event
menu and remove one
using the CLEAR key
_____________________________________
MENU to Continue
SELECT EVENT [1-16]:01
1 10:30 PM On Wednesdays
1H30M Ch10 Deck2 Auto
2 : 9:00 AM On Sun Dec/06
0H30M Line1 Deck2 SP
3 : 7:00 PM On Mon-Fri
2H00M Line2 Deck2 SLP
4 : 12:15 PM On Everyday
0H15M Ch06 Deck2 Auto
/ = Move = Sel MENU=Quit