Filter
Top Products
To add a channel to Channel Memory:
① Follow steps ∂ and ∑ on the preceding page.
≠ Use the Numeric buttons to select on the VCR-2 the channel you wish to
add.
③ Use the Up/Down buttons to highlight Add.
④ Press Next to add the channel.
∞ Press Save or Escape to return to the Main Menu.
To delete a channel from Channel Memory:
① Follow steps ∂ and ∑ on the preceding page.
≠ Use the Numeric buttons (or the Channel Up/Down buttons) to select
on the VCR-2 the channel you wish to delete.
③ Use the Up/Down buttons to highlight Delete.
④ Press Next to delete the channel.
∞ Press Save or Escape to return to the Main Menu.
To add all channels to Channel Memory:
① Follow steps ∂ and ∑ on the preceding page.
≠ Use the Up/Down buttons to highlight Add All.
③ Press Next to add all the channels.
④ Press Save or Escape to return to the Main Menu.
Your Channel Up/Down buttons will now select every channel, whether
a signal is present or not.
To erase all the channels from Channel Memory:
① Follow steps ∂ and ∑ on the preceding page.
≠ Use the Up/Down buttons to highlight Delete All.
③ Press Next to delete all the channels.
④ Press Save or Escape to return to the Main Menu.
Channel memory will now contain no channels. Your Channel Up/
Down buttons will have no effect until channels are added again.
On-Screen
Programming
Channel/Tuner Menu
27