Filter
Top Products
SAP SAPSET
VCR
SUN
MON TUE WED THU FRI
SAT
ON
SP
LP
EP
:
:
:
AM
PM
CH
MONO STEREO TIMER PROG OTR LINE SIMUL CATV
This illustration shows all the indicators on the Front Panel Display. The
indicators will not all be displayed at one time.
The Front Panel Display shows the status for one deck at a time. You can
choose the deck that is displayed by pressing Deck 1 or Deck 2 from the
Remote Control. There must be a tape in the compartment for that deck’s
status to display. For your convenience, the On-Screen Display, which
appears on your TV screen, shows the status of both decks.
CATV - Indicates that STD CATV, HRC CATV, or IRC CATV has been chosen
for Antenna Source.
Channel - Displays the number of the channel being received by the VCR-2
tuner.
Clock/Tape Counter - Displays the present time or Tape Counter number.
Day of Week - Displays the current day.
Deck Status - Displays the present status of the last deck viewed, such as
REC when a recording is in progress. Deck Status is blank if that deck
does not contain a tape.
LINE - This indicator reserved for future use.
MONO - Indicates that the Audio Source is set to Mono.
ON - Indicates that One-Two Recording™ is in progress.
OTR - Indicates that One-Two Recording is in progress.
PROG - Indicates that a Timer Recording event has been programmed.
SAP - Indicates that a Second Audio Program (SAP) signal is being received.
SAPSET - Indicates that the Audio Source is set to SAP or SAP + TV.
SIMUL - Indicates that the Audio Source is set to Simulcast.
Speed - Displays the present recording or play speed.
STEREO - Indicates that a stereo signal is being received.
Tape - Indicates that a tape is in one or both of the decks.
TIMER - Indicates that a Timer Recording event is in progress, or a Timer
Recording event has been set and your VCR-2 is off. Blinks for Timer
Record Error.
VCR - Indicates that your VCR-2 is the source of the picture on your TV
screen.
Deck Status TapeSpeed Clock/Tape Counter Channel
The Front Panel Display is located in the
center of your VCR-2 Front Panel.
Front Panel
Display
29