Filter
Top Products
You can use this connection if you have a converter with your cable
system.
You can record any scrambled or non-scrambled channel and watch that
channel.
Your VCR-2 can be turned off during normal TV viewing.
To record and view a scrambled or non-scrambled channel, follow these
instructions.
① Turn on your TV, VCR-2, and converter.
≠ Use the Channel Up/Down buttons to set your VCR-2 to channel 2, 3 or
4, whichever is used by your cable system. You may view this channel
selection on the Front Panel Display of your VCR-2.
③ Set the VCR-2 back panel switch to either channel 3 or 4, choosing the
one that you did not use for your cable system (in ≠ above).
④ Set your TV tuner to the same channel used in ③ above.
▲ The above instructions apply when your VCR-2 is on. If you wish to
view your cable system when your VCR-2 is off, set your TV tuner to
channel 2, 3 or 4, whichever is used by your cable system. ▲
∞ On the cable system converter, select the channel to view or record.
Start the recording (page 14). Make sure the converter is left on during
the recording.
Cable
Connection 2
OUT TO TV
IN FROM:
ANTENNA/
CABLE
CH 3
CH 4
VHF/UHF
CABLE
OUTLET
DUAL-DECK VCR BACK PANEL
TV BACK PANEL
Dual-Deck
VCR Cable
(supplied)
VIDEO
IN OUT
Coaxial Cable
CONVERTER
35