Filter
Top Products
OUT TO TV
IN FROM:
ANTENNA/
CABLE
Twin-lead
CH 3
CH 4
VHF/UHF
Coaxial
ANTENNA CABLES
DUAL-DECK VCR BACK PANEL
TV BACK PANEL
Dual-Deck
VCR Cable
(supplied)
VIDEO
IN OUT
or
Adapter
(supplied)
Combined VHF/UHF Antennas, VHF only, UHF
only
∂ Connect your antenna cable to the In from Antenna/Cable connection
(use the supplied adapter if your cable is twin-lead).
∑ A cable is supplied with your VCR-2. Connect the coaxial (round) end of
this cable to the Out to TV connection. Connect the other end of the
supplied cable to the combined VHF/UHF input on your TV.
Use a VHF/UHF splitter (not included) if your TV has separate VHF and
UHF inputs.
There are numerous possibilities for connecting your VCR-2, your TV, your
antenna or cable system, your other video equipment, and your stereo
receiver. To choose an installation that fits your needs and your equipment,
follow these steps.
① If you don’t have a cable system, see Antenna Connections on this and
the next page.
≠ If you have a cable system but have no scrambled channels, use Cable
Connection 1, page 34.
③ If you have a cable system with a converter (some or all channels
scrambled), use Cable Connection 2 or Cable Connection 3, or consult
your cable company for advice on other connections (which may
require additional equipment).
32
∑
∑
∂
Antenna
Connections