Filter
Top Products
24
4 - Recording (cont.)
One Touch Copy
Copying from DVD to VHS
You can copy the contents of a DVD to a VHS
tape using the front panel DVDVCR button.
1
Insert the disc you wish to copy in the DVD
deck and close the disc tray.
2
Insert a blank VHS videotape into the VCR
deck.
3
Select DVD mode by pressing DVD on the
remote control or DVD•VCR on the front
panel.
4
Find the place on the DVD from which
you want to start recording using the
PLAY/PAUSE , REW and FF func-
tions.
• For best results, pause playback at the
point from which you want to record.
5
Press DVDVCR on the front panel.
• The Copy to VCR menu appears.
6
Press REC SPEED to select the desired
Record Mode:
• SP - Good quality
• SLP - Low quality (3 times the recording
length of SP mode).
7
Press DVDVCR again to start copying.
8
To stop copying at any time, press STOP.
• You must stop the copy process
manually when the DVD ends, or the unit
may replay and record over and over
again.
NOTE: if the DVD you are
attempting to copy is copy-
protected, you will not be able to
copy the disc. It is not permitted to
copy Macrovision encoded DVDs.
Copy to VCR does not work in Progressive
Scan Mode
During one touch copy you can reposition
the DVD and/or change the Record Speed
by pressing PLAY/PAUSE . When
finished, press DVDVCR again to resume
copying.
Copying from VHS to DVD
You can copy the contents of a VHS tape to a
DVD+R/RW using the front panel VCRDVD
button. This allows you to archive your old VHS
tapes to DVD.
1
Insert the VHS videotape you wish to copy
into the VCR deck.
2
Insert a blank DVD+R or DVD+RW disc in
the DVD deck and close the disc tray.
3
Select VCR mode by pressing VCR on the
remote control or DVD•VCR on the front
panel.
4
Find the place on the VHS tape from
which you want to start recording using the
PLAY/PAUSE , REW and FF func-
tions.
• For best results, pause playback at the
point from which you want to record.
5
Press VCRDVD on the front panel.
• The Copy to DVD menu appears.
• If the YesDVD logo appears on this
menu, a YesDVD will automatically be
created when recording is complete. To
enable/disable the YesDVD feature, see
page 32.
6
Press REC SPEED to select the desired
Record Mode:
• HQ - Best quality (1 hour/disc).
• SP - Good quality (2 hours/disc).
• EP - Average quality (4 hours/disc).
• SLP - Low quality (6 hours/disc).
7
Press VCRDVD again to start copying.
8
To stop copying at any time, press STOP.
• Copying will stop automatically when the
VHS tape ends.
NOTE: If the VHS videotape you
are attempting to copy is copy-
protected, you will not be able to
copy the tape. It is not permitted to
copy Macrovision encoded tapes.
During one touch copy you can reposition
the tape by pressing PLAY/PAUSE .
When finished, press VCRDVD again to
resume copying.