Filter
Top Products
REAR PANEL JACKS
18
REAR PANEL JACKS
Antenna Input/Output
The remote control allows you to switch between two separate 75-Ohm RF antenna inputs,
ANT A and ANT B. ANT A input can be displayed as a main picture or sub-picture. ANT B
can only be displayed as a main picture. (ANT B cannot be displayed as a sub-picture.) The
antenna output labeled "TO CONVERTER" allows the ANT A connection to pass directly to a
different source such as a cable box, when ANT B is displayed as a main picture.
Audio/Video Inputs 1and 2
The INPUT button will step through each video source and antenna source input each time it is
pressed. Use the audio and video inputs to connect external devices, such as VCRs,
camcorders, laserdisc players, DVD players, etc. (If you have mono sound, insert the audio
cable into the left channel jack).
NOTE: You may use VIDEO, S-VIDEO, or COMPONENT VIDEO: Y-CB-CR inputs to connect
to INPUT 2, but note that only one of these may be used at a time.
Monitor Out
These jacks provide fixed audio and video signals which are used for recording.To have S-
VIDEO , S-VIDEO signal needs to be input to INPUT 1 or INPUT 2, or INPUT 3.
(4) WIRELESS OUT
These jacks provide variable audio output to a set of wireless speakers. They can also be