Filter
Top Products
CONNECTING EXTERNAL VIDEO SOURCES
28
3. Connect the cable from the CR or R-Y OUT or B-Y of the Laserdisc or the DVD player to
the INPUT 2 (CR) jack, as shown on the TV set below.
4. Connect the cable from the AUDIO OUT R of the Laserdisc or DVD player to the INPUT 2
(AUDIO/R) jack.
5. Connect the cable from the AUDIO OUT L of the Laserdisc or DVD player to the INPUT 2
(AUDIO/L) jack.
6. Press the INPUT button until VIDEO:2 appears, to view the program from the Laserdisc or
DVD player. The VIDEO:2 icon disappears automatically after approximately eight seconds.
7. Press the INPUT button to return to the previous channel.
NOTES:
Completely insert the connection cord plugs when connecting to rear panel jacks. The picture
that is played back will be abnormal if the connection is loose.
See Page 15 for tips on REAR PANEL CONNECTIONS.