Filter
Top Products
USING THE REMOTE TO CONTROL CABLE BOX FUNCTIONS
44
USING THE REMOTE TO CONTROL CABLE BOX FUNCTIONS
Operating the precoded function for your cable box.
This remote is designed to operate different types of cable boxes. You must first program the
remote to match the remote system of your cable box. (Refer to page 34.)
1. Turn ON your cable box.
2. Aim the remote control at the front of your cable box.
3. Press the CBL button to switch to Cable pre-coded mode.
4. Hold down the CBL button on the remote and enter the two digit preset code that matched
your Cable box as shown on page 34. The indicator light will flash 3 times if the code was
accepted.
5. Aim the remote at the cable box and press the POWER button. The remote will turn off
your Cable box when the correct two digit preset code is entered. When this occurs, the
remote control is programmed for your Cable box. If the Cable box does not turn off, try a
different two digit preset code.
6. The remote will now control your Cable box.