Filter
Top Products
USING THE REMOTE TO CONTROL DVD FUNCTIONS
47
USING THE REMOTE TO CONTROL DVD FUNCTIONS
Operating the precoded function for your DVD player.
This remote is designed to operate different types of DVD players. You must first program the
remote to match the remote system of your DVD player. (refer to page 34 for precodes)
1. Turn ON your DVD player.
2. Aim the remote control at the front of your DVD player.
3. Press and release the DVD button to switch to DVD pre-coded mode.
4. Hold down the DVD button on the remote and enter the two digit preset code that matches
your DVD player, as shown on page 34. The indicator light will flash 3 times if the code was
accepted.
5. Aim the remote at the DVD player and press the POWER button. The remote will turn off
your DVD player when the correct two digit preset code is entered. When this occurs, the
remote control is programmed for your DVD player. If the DVD player does not turn off, try a
different two digit preset code.
6. The remote will now control your DVD player.