Filter
Top Products
PICTURE-IN-PICTURE (PIP)
38
NOTES:
1. Since ANT B source cannot be viewed as a sub-picture, only SPLIT mode PIP is possible
when ANT B is selected as the main channel.
2. When ANT B is selected as a main channel, the SWAP feature is disabled.
3. When the COMPONENT VIDEO: Y-CB-CR INPUT 2 is selected as PIP, it will appear as a
blank sub-picture.
4. When tuned to VIDEO:2 with COMPONENT VIDEO: (Y-CB-CR) you will not be able to
access the PIP functions.
5. Only sound from main picture can be heard, unless you choose sub-picture audio from the
THEATER-WIRELESS SOUND mode and use the WIRELESS OUT outputs on the rear panel.
PICTURE-IN-PICTURE CONT.
SURF MODE PIP
This feature will automatically scan all active channel number (those set in memory) and
display them as PIP sub-pictures, along the right edge of the screen. Press the PIP button a
second time to remove the sub-pictures form the screen.
NOTES:
1. If no buttons are pressed when in SURF mode, auto-scanning will continuously scan
channels in memory.
2. If a channel is tuned during this SURF scanning, sub-pictures will be removed from the
screen.
3. SURF mode PIP is allowed only when ANT A is selected as the main channel.
4. If PARENTAL CONTROL MOVIE/TV RATINGS setting is ON, PIP SURF mode will be
deactivated.
(2) SWAP Button
If you wish to switch what is being shown on the main picture to the sub-picture, press the
SWAP button.