Filter
Top Products
REAR SPEAKER TERMINAL CONNECTIONS
22
REAR SPEAKER TERMINAL CONNECTIONS
CONNECT AFTER TURNING THE POWER TO THE TV OFF.
Press the Right Speaker red button and insert the positive (+) lead wire into the hole next to
the button. Once the wire is in place, pull the red button back to original position and the wire is
locked into place. In the same manner, press the Right Speaker black button and insert the
negative (-) lead wire. Repeat this procedure for the Left Speaker.
CAUTION: Do not short speaker terminal, (do not connect a wire directly across any
two terminals). This could cause damage to your audio outputs or other damage to your TV.
CAUTION: Do not connect speakers simultaneously to the REAR SPEAKER terminal
of the Projection TV and an external amplifier. This could damage both the TV and the
speakers. Your TV was designed to use 8-Ohm speakers only. Any other type may degrade
the audio performance of your entertainment system..
TIPS ON REAR PANEL CONNECTIONS
TIPS ON REAR PANEL CONNECTIONS
S-Video connections are provided for high performance laserdisc players, VCRs etc., that
have this feature. Use these connections in place of the standard video connection if your
device has this feature.
If your device has only one audio output (mono sound), connect it to the left audio jack on the
TV.