Filter
Top Products
THEATER
87
SURROUND
The following surround settings will reproduce the "live" sound you would hear in concert halls,
sports stadiums, movie theaters, etc. when you set up your speaker system as shown in the
section on audio system setup on pages 20-21. The surround system is most effective with
movie and other stereo material that is Dolby Surround encoded, and played on a stereo
VCR.
When using WIRELESS SOUND, REAR SPEAKERS mode must be chosen to receive the
SURROUND audio program.
To enter the SURROUND MODE, use THUMB STICK
or to highlight then press down
on THUMB STICK to select SURROUND MODE of your choice.
Now press THUMB STICK
or to highlight, then press down on THUMB STICK to
select speaker to be adjusted.
Use THUMB STICK
or to adjust the volume of REAR and MAIN speakers. MAIN volume
also controls AUDIO TO HI-FI output level. Adjust MAIN volume first.
Each SURROUND setting has separate MAIN and REAR volume controls, except OFF and
DOLBY 3 STEREO which has no rear volume controls. DOLBY PRO LOGIC and DOLBY 3
STEREO also have CENTER volume controls, while MATRIX and HALL have BALANCE
controls. (Balance while in DOLBY PRO LOGIC and DOLBY 3 STEREO modes is adjusted by
using the TEST TONE volume controls. The CENTER and REAR volume will increase or
decrease when MAIN is adjusted, keeping an equal balance between the SURROUND
channels.