Filter
Top Products
Switch the RF Channel
When the VCR is on, its video signal can come into your TV on either channel 3 or channel 4. You need to
select the appropriate channel.
• Turn on the power of both the TV and the VCR. Press the ANT. OUT button on front of the VCR. Pressing the
button alternates between RFCH 03 (channel 3) and RFCH 04 (channel 4) in the VCR's display.
Display the channel which is not used by a commercial channel in your area.
ADVANCED DSS HOOKUP [I]
WITH THIS HOOKUP
YOU CAN...
• WATCH AVAILABLE TV OR DSS CHANNELS
• RECORD AND WATCH THE SAME CHANNEL
• RECORD ONE CHANNEL AND WATCH ANOTHER
YOU CAN'T...
• RECORD A CHANNEL OTHER THAN DSS AND WATCH A DSS CHANNEL
Hookup I Illustration
Notes:
• Your VCR cannot receive RF signals from the antenna or cable through the DSS box. Connect the antenna or
cable cord to the IN FROM ANT jack of your VCR, not to the RF IN/OUT jacks of the DSS box.
• When the DSS box is connected, you cannot control the cable box from the VCR.