Filter
Top Products
5 Press the number buttons (1), (2) or (3) to select ONE TIME, DAILY or WEEKLY RECORDING
Note: Programming does not take effect unless you select one of these options.
6 Press the (5) button to choose recording speed SP (standard play) or EP (extended play).
The screen will display all the details of the program you chose. Check the CH number to make sure it is the
right one. If not, you need to check your VCR Plus+ channel setup again.
7 Review the screen to be sure everything is set as you want, then press the PROGRAM button to
complete your programming or continue with additional programs.
8 Press the POWER button to turn off the VCR.
The delayed recording indicator will display on the VCR.
This tells you that the VCR will automatically record at the times and dates you have programmed.
When you have set up all the timed recordings you want:
• Don't forget to load a videocassette (With the safety tab still attached) to record on.
• If using a cable box the VCR can control, turn on the cable box before the time the recording is to begin.
Please refer to "Cable Box Setup", on Page 27 in the "First Time Setup" section.