Filter
Top Products
• An indicator on the VCR's display shows which speed is selected.
5 Press the CH (
/ ) button or the number buttons to select the channel you want to record.
Example: Select channel 8.
• 100/ENT and (2) and (4) for channel 124.
6 Press the REC button on the remote control or the REC/IRT button on the VCR.
Recording will start and the REC indicator on the VCR will light red.
Notes:
• Recording will not start unless the cassette has the safety tab in place. If this tab has been removed, the VCR
will eject the tape.
• Press the PAUSE button to set the VCR to the recording pause mode. Press the button again to re-start
recording.
• If you stay in PAUSE mode for more than 5 minutes, the VCR automatically switches to STOP mode to protect
the tape.
7 Press the STOP button to finish recording.
The commercial advance function setting screen will appear.
Select 1 or 2 within one minute after this screen has appeared. If it is not selected within one minute, the menu
will disappear and "1 MARKING START" will be selected.
• When you press the (1) button and if the recorded program includes commercials, the VCR will rewind the tape