Filter
Top Products
The MENU button will flash for about 30 seconds, and "120" flashes in the VCR's display for about 10 seconds.
2 Press the CLEAR button to choose the type of tape you are using.
120: T-120 or shorter tape
160: T-140 or T-160 tape
180: T-180 tape
210: T-210 tape
• The display is displayed for a short time, so you must press the button quickly.
• If you are not using a T-140, T-160, T-180 or T-210 tape, choose "210". When the display disappears, proceed
with normal or time-delayed recording.
NOTES:
• Once you select the length of a tape, it is not necessary to select it again for future recordings on the same
tape.
• Record programs in sequence from the beginning of the tape.
• If you record for less than 5 minutes at the SP speed (15 minuts at the EP speed), tape data will not be stored
in memory.
• If you select an incorrect tape length, the correct data will not be stored.
How to locate the beginning of a program or a non-recorded (blank)
section
1 Insert a tape recorded by this VCR.
The power comes on automatically, the tape indicator lights on the display, and the "MENU" button on the VCR
flashes.
2 Press MENU button on the VCR or the remote control. The directory screen will appear.