Filter
Top Products
2 Press the select or button to specify the TAPE NO. you want to display.
Press the select
to move toward the lower numbers.
Press the select
to move toward the higher numbers.
EXAMPLE:
Display tape number 2.
Press the select
or button to move up or down through the list until number 2 is selected.
3 Press the (5) button.
Details of tape number 2 will appear on the screen.
• If you want to review other tape data, press the (5) button to restore the screen in step 1. Perform steps 2 and
3.
• Press the GUIDE button for normal viewing.
Precautions
When tapes recorded without the tape navigation feature are inserted into the VCR, the "120" display (selecting
tape length) will appear in the VCR's display automatically. This includes:
1 Blank tape
2 Tape recorded by another VCR
3 Tape recorded with TAPE DATE <OFF>
4 Tape whose tape data has been deleted.
If the MENU button is pressed, 1 - 4 tapes will produce the following screens:
When the tape data memory is full, the following screens will appear when a recording is made or when the
timer is programmed: