Filter
Top Products
[B] Turn the ring in the stop mode to fast forward or rewind the tape.
• The tape continues to be wound even after you release the dial.
Note:
• If noise bars appear on the TV screen during the SLOW/STILL modes, turn and hold the shuttle ring in the
SLOW position, then press the CH ( or ) button on the remote control to minimize the noise bars. The
noise bars are then eliminated automatically in the STILL mode.
• Since thin videotape is used in T-180 and longer cassettes, do not repeatedly perform the following operations
with these tapes.
-Fast forward, rewind, slow play
-Insertion and ejection of tapes
USING THE "INDEX" FEATURE
To find specific sections on a tape using the "INDEX" feature
Jump to an Index Mark with INDEX
A quick way to access specific program segments is with the index search feature. This lets you move through a
tape that has several recordings on it by searching for the INDEX "mark". This function only works with
recordings that have been set up with indexing. You create an INDEX mark (VISS signal) every time you pres
the REC or REC/IRT button while recording.
1 Press the DISPLAY button in the stop mode.