Filter
Top Products
DSS box did not tune to channel 999: Press the (2) button to return to step 8, and enter a different code
number.
If the codes you entered do not work;
• Try repositioning the DSS box on top of the VCR and reentering the codes.
• Try entering all code numbers (00 - 03). Press the number button to enter another code number.
If none of the codes work, press the GUIDE button to quit. The VCR will not control your DSS box. If you wish to
program a DSS broadcast for delayed recording, press the AVX button to select "LINE 1" instead of selecting a
recording channel by the ordinary programming procedure. Turn on the DSS box and leave it tuned to the
channel you want to record before the recording is scheduled to begin.
Note: If you make a mistake when entering digit, press the CLEAR button repeatedly to return the white dash "-"
to the digit to be corrected. Then, punch in the correct number.
PLAYBACK
To playback a recorded tape
1 Turn on the TV and select the video channel (3 or 4).
Or, if you are hooked up with an audio/video cable, set the TV to AUX or VIDEO.
2 Insert a recorded tape.
The power comes on automatically and the tape indicator lights on the display.
• When a cassette without its safety tab is inserted, playback starts automatically.
• When a tape is inserted the Tape Navigation function may operate and "120" display may flash after the
MENU button indicator on the VCR flashes. Ignore this display as this has nothing to do with tape play. This
display will disappear after about 10 seconds.
3 Press the PLAY button to start playing the tape. Click to see remote control illustration.